Teo accessibility information related to section 508 of the U.S. Rehabilitation Act of 1973. Applicable paragraph: 1194.23 Telecommunication Products.
ISDN Telephones – Models 6220T, 6220U
VoIP Telephones – Model 7810
These products use an industry-standard K-type modular handset that is compatible with standard TTY acoustic couplers. The handset microphone may be turned on and off via a Mute key. The optional 6002TA Analog Port Terminal Adapter for the 6210 model provides a standard non-acoustic (POTS) connection point for direct connect TTYs.
Network-provided text information, including caller ID is displayed on an integral LCD display. Display characters are 5.55mm high and display tilt is adjustable from 20 to 70 degrees.
Receive volume levels are adjustable over approximately a 21dB range in 8 increments. Handset volume level is reset to a user-configurable default level between calls. Transmit volume level for headset operation is adjustable through menu setup.
The handset is Hearing Aid Compatible, as defined by FCC Part 68 regulations.
Controls and keys are tactilely discernible without activating the controls or keys. They are all operable with one hand and do not require tight grasping, pinching, or twisting. The force required to activate controls and keys are less than one pound. No key repeat functions are used.
A tactile locator (raised dot) is provided on key 5 of the dial pad. Lighted indicators provide visual indication of toggle control status, as well as the activation state of some network features. Except for network-provided audible indications, no other touch or sound status indications are provided.
ISDN Attendant Consoles – Models 2260d, 40d120
These products use an industry-standard K-type modular handset that is compatible with standard TTY acoustic couplers. They do not provide a standard non-acoustic connection point for TTYs.
Network-provided text information, including caller ID is displayed on an integral backlit LCD display. Display characters are 4.89 mm high and display tilt is adjustable from 45 to 85 degrees.
Receive volume levels are adjustable over approximately a 24 dB range in 8 increments. Handset volume level is retained between calls. Transmit volume level is not adjustable.
The handset is Hearing Aid Compatible, as defined by FCC Part 68 regulations.
Controls and keys are tactilely discernible without activating the controls or keys. They are all operable with one hand and do not require tight grasping, pinching, or twisting. The force required to activate controls and keys are less than one pound. No key repeat functions are used.
Lighted indicators provide visual indication of toggle control status, as well as the activation state of some network features. Except for network-provided audible indications, no other touch or sound status indications are provided.
NT1 Products – Model NT1B-300TC
These products are back-room equipment, intended for service personnel use only, and provide LED indications for maintenance and troubleshooting. This equipment exempted from accessibility requirements under Paragraph 1194.3(f).